Conducting oil pump, heat pump noisy mainly due to bearing damage or conducting oil pump in the cycle due to high temperature conducting oil pump cavitation and vibration generated propping causes of result. Since conducting oil pump long relationship operation, the user during use of the bearing chamber oil are not changed frequently, resulting in bearing long-term long-term high-speed operation under the lubrication conditions of poor conditions caused by thermal oil pump bearing damage, which is conducting oil pump noise. It should be in the daily production regularly conducting oil pump for maintenance, cleaning, timely replacement of the bearing housing to the bearing lubrication oil.

Once bearing damage bearings should be replaced to avoid destroying the other parts of the pump. In addition, the installation of new customers in the use of conducting oil pump is often used for the first oil or oil temperature rises too fast too high, this will cause HTF produce gas in the pipeline, these gases in conducting oil pump delivery cycle process it will instantly explode when conducting oil pump through, so when conducting oil pump noise. Conducting oil pump should be used for the first time, the oil temperature should be slowly increased while conducting oil pump start, gradually open line exhaust valve to exhaust gas inside the pipe after the official use of conducting oil pump clean. Yet another is conducting oil pump is installed and export pipeline is not marked with the anchor or anchor shaky conducting oil pump caused a huge resonance line is in use, it will produce noise. Shall promptly solid line support.